Using PAUSE
For best results, some recipes call for stirring,
turning over or rearranging food, or for adding
ingredients during cooking. Your microwave oven
can be set to pause between COOK 1 and COOK
2, between AUTO SET and a following cycle,
between QUICK DEFROST and a followino
cycle (except COOK l), or during QUICK I
DEFROST.
This gives you time to stir (casseroles), turn over
(meat) or rearrange (potatoes) food, or to add
ingredients. PAUSE is not available between any
cycle and KEEP WARM or after QUICK
DEFROST.
1. Put food in the oven and close the oven door.
2. Touch in the desired cooking instructions for
COOK 1, (page 20).
3. Touch PAUSE. The COOK 1 Indicator Light will
be on and the Display will show “PAUS”.
4. Touch in the desired cooking instructions for
COOK 2, (see page 20).
5. Touch START. The Display will show the time
you selected for Cook 1.
When Cook 1 is over, 2 beeps will sound and
the oven will shut off. The Display will show
“PAUS”.
The COOK 2 Indicator Light will come on.
Open the door, stir, turn over or rearrange
the food or add ingredients. Close the door.
Touch START to continue with Cook 2.
NOTE:
The oven will remain off until you touch
START.
23