Filter
Top Products
6.
Touch COOK POWER.
(Options: Skip to 8 if you
want to cook at high
power.)
7. Touch a Number Pad for
the Cook Power you want.
8. Touch START.
..--..I ___-, _._
^.
d
count
own
d
count
own
The COOK POWER Signal Light will
come on and the Display will show
two 0’s.
The Display will show what You
touched. This example shows 60%
of full power.
,.
When You touch START, the QUICK
DEFROST Signal Light will stay on. All
other Signal Lights will go off.
The Display counts down the time to
show how much time is left in the
defrost cycle.
When the defrost time ends, the
microwave oven automatically lets
the food stand for the same amount
of time used for defrosting. The
QUICK DEFROST Signal Light stays on
and the Display counts down the
standing time. During the count-
down the oven will be dark, and
the fan will be off.
When the standing time is over, You
WIII hear 2 beeps and the cooking
cycle will start.
The COOK Signal Light will be on
during the cooking cycle. The
COOK POWER Light will also be on if
you are using a Cook Power other
than high.
The Display counts down the time to
show how much time is left in the
cooking cycle.
For 2 of every 10 seconds, the
Display will show the Cook Power
You selected if You are using a
Cook Power other than high.
When the Cook Cycle ends, you will
hear 4 beeps. (You can stop the
beeping by opening the oven door
or touching CANCEL.) When the
beeping stops, the Display will show
the time of day.
11