Filter
Top Products
Setting the clock
When the oven is first plugged in, the Display shows 88:88. If the electric power ever
goes off, the Display will also show all 8’s when the power comes back on.
You can cook without setting the clock, but the display will be blank after cooking.
The oven door must be closed before setting the clock.
DO THIS...
1. Touch CLOCK SET.
2. Touch Number Pads for
the correct time of day.
3.
Touch START.
THIS HAPPENS...
Cooking at high cook power
DO THIS...
1.
Put food in the oven and
close the door.
2.
Touch COOK.
3. Touch Number Pads for
the cooking time you
want.
THIS HAPPENS...
The CLOCK SET Signal Light will
come on. The Display will show a
“01’ Start touching number pads
for the desired time within 5
seconds.
The Display will show what num-
bers you touched in the order you
touched them. This example
shows 3125.
The Clock is set when the CLOCK
SET Signal Light goes off
The Display will flash on and off if
you have touched in an incorrect
time such as12:65.
The COOK Signal Light will come
on and the Display will show four O’s
The Display will show the numbers
you touched in the order you
touched them. This example
shows1 minute, 30 seconds.
6