Filter
Top Products
Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-The Digital Display/Clock, and Indicator
Lights
-Command Pods
-Number Pads
Instructions for each control are covered on the
following pages. Read them carefully.
When you first plug in the oven, the Display
will show 88:88. If, after you set the Clock
(page 6), the Display again shows all 8’s. it
means your electricity was off for a while.
Reset the Clock.
Digital display/clock and
indicator lighfs
Command pads
When you are not
using the microwave
oven, this is an
accurate digital
clock. When you are
using the microwave
oven, this displays
time and Cook Power
settings, indicator
lights and shows you
what Number Pads you
touched.
Touch Command
Pads to tell the micro-
wave oven what to do
and in what order.
A few examples:
- CLOCK SET tells the
oven you are going
to set the clock.
- START tells the oven
to start. See page 18
for information on the tone you hear when touch-
ing any pad.
Each Command Pad (except START and CANCEL)
lights an Indicator Light on the digital display.
The Indicator Light comes on when you touch the
Command Pad.
While the oven is running, an Indicator Light (or
lights] will be on to show what the oven is doing.
Number pads
the oven what you
q q
m $i;h;!;r$T”ll
-a time,