Filter
Top Products
GUIDE TO USING THE ELECTRONIC PROGRAMMER
GB
Electronic Display
programmer
Operating the oven using the electronic programmer
Temperature
increase
indicators
Heat
Maintenance
Extra
browning
Cooking time ClockEnd of
cooking time
Fast starting the oven
When the oven is connected to the power supply for the first time, or reconnected after a power
failure, the display indicates “ ”.
To switch on the oven:
1. Turn knob
to
“0”
.
2. press the
button. The display shows 0:00
“--:--”.
Selecting and changing the clock time:
1. Press the button
three times.
2. Turn the knob
within 15 seconds to set the time of day. The time of day flashes on the display.
3. Press the button
or wait 15 seconds to get automatic confirmation of the setting.
To modify the time of the day:
Press the button
twice blinks on the display. Repeat the steps described above.
Select cooking function:
1. Turn knob
to the chosen function: the preset temperature or grill level will flash on the display.
2. If this value is right, press the button
to confirm or wait 10 seconds to have the setting accepted
automatically.
To change the pre-set temperature or grill level:
1. Turn knob
!
: the temperature (or grill level when knob
is on the selection ) blinks on
the display.
2. Press button
to confirm or else wait about 10 seconds to have the setting accepted automatically.
The oven begins operation about 5 seconds after confirmation: the temperature increase indicators
on the display turn on sequentially, indicating the temperature increase on the graduated scale
°C
.
Note.:
The set values can be changed even during cooking.
At the end of cooking:
Switch off the oven by turning knob
back to
“0”
. The time of day appears again on the display.
Important notes:
To cancel any selection, turn knob
to
“0”
.
Keeping button
down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons.
Press button
again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the
“ ” and functions) after 4.5 hours of continuous operation.
Selecting the cooking time:
Select the cooking time (available with any function) to turn the oven on for a specified period of time. At
the end of the specified time the oven will switch off automatically. The maximum programmed cooking
time is 3 hours and 59 minutes.
1. Set the function and temperature or grill level (see chapter: “Fast starting the oven” and “Selecting
the cooking function”).
2. Repeatedly press the button
, the indicator blinks on the display and
“-0:00”
appears.
3. Turn knob
!
clockwise: the selected time blinks on the display. The appearance of the dash
”-”
indicates that the chosen time decreases until
“0”
is reached.
4. The oven automatically starts cooking 20 seconds after the setting and the time remaining until the
end of cooking appears on the display.
Note.:
To view or change the previously set temperature, turn the knob
!
by one click. To return
to the display of the remaining time, wait 20 seconds or press the button
.
To use the special functions Extra browning and Heat Maintenance , consult the chapter “Special
functions”.
To modify the chosen temperature or grill level:
Tur n t he kn ob
!
and confirm by pressing the button
or wait about 10 seconds for automatic
acceptance of the setting.
Appearance of on the display:
When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal
sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay
on for 25 min.
1. Press button
to stop the acoustic signal.
2. Turn knob
back to
“0”
. The lamp turns off.
The time of day appears again on the display.
Setting end of cooking time
By using this function it is possible to preset the end of cooking time. The maximum programmed
cooking time is 23 hours and 59 minutes.
1. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph:
“Select cooking function”.
2. Example: it is 10 a.m: press button
, the indicator blinks on the display and
“- 0:00”
appears.
3. Set the cooking time (e.g. 45 minutes) by turning the knob
!
: the set time appears on the display.
4. Press the button
to confirm setting selection (e.g. 45 minutes): the indicator blinks and the display
indicates the time of day plus the cooking time (e.g.: time 10:00 + 45 minutes = ore 10:45).
5. Select the time when you want cooking to end by turning the knob
!
(e.g.: 12:30).
6. Repeatedly press the button
until the time of day (10:00) appears, or wait about 20 seconds for
the setting to be automatically accepted.
The oven will turn on automatically at the end of cooking time minus cooking time
(e.g. 11:45): on the display turn on.
To verify the chosen temperature or grill level, turn knob
!
by one click.
To verify or change both the cooking time (e.g.: 45 min.) and the end of cooking time (e.g.: 12:39), press
the
button.
ON/OFF - Function Selector Knob
Button to select and confirm
programmes
!
Knob to change preprogrammed values
(temperature, time, levels)
!