Whirlpool N/A Double Oven User Manual


  Open as PDF
of 6
 
Setting end of cooking time
Special functions:
(Extra browning and
Heat Maintenance
)
These functions are only available with the selection of cooking time or end of cooking time.
It is possible to select the two special functions simultaneously or separately.
Extra browning
This function is used for browning food (e.g. roast) during cooking. It is possible to choose between levels
1-2-3
, where the
number
1
represents minimum browning and the number
3
maximum browning.
This function can be selected only together with the functions .
Selecting the special Extra Browning function:
Selecting the special Heat Maintenance function:
Minute minder
By using this function it is possible to preset the end of cooking time. The maximum programmed
cooking time is 23 hours and 59 minutes.
1. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph:
“Select cooking function”.
2. Example: it is 10 a.m.: press button
, the indicator blinks on the display and
“- 0:00”
appears.
3. Set the cooking time (e.g. 45 minutes) by turning the knob
!
: the set time appears on the
display.
4. Press the button
to confirm setting selection (e.g. 45 minutes): the indicator blinks and
the display indicates the time of day plus the cooking time (e.g.: time 10:00 + 45 minutes = ore
10:45).
5. Select the time when you want cooking to end by turning the knob
!
(e.g.: 12:30).
6. Repeatedly press the button
until the time of day (10:00) appears, or wait about 20 seconds
for the setting to be automatically accepted.
The oven will turn on automatically at the end of cooking time minus cooking time
(e.g. 11:45): on the display turn on.
To verify the chosen temperature or grill level, turn knob
!
by one click.
To verify or change both the cooking time (e.g. 45 min.) and the end of cooking time (e.g. 12:30),
press the button
.
1. Set the cooking time or end of cooking time. See “Fast starting the oven” and “Selecting the
cooking function”.
2. Repeatedly press button
until the symbol blinks on the display and
“0”
appears.
3. Turn the knob
!
to select the food's level of browning:
1, 2 or 3
.
4. Press button
twice or wait 20 seconds to get automatic confirmation of the setting.
Heat Maintenance
This function is used to maintain an oven temperature of 60°C at the end of cooking with automatic oven
operation.
The “Heat Maintenance” function can be selected only together with the functions .
1. Set the cooking time or end of cooking time. See chapter: “Fast starting the oven” and “Selecting
the cooking function”
2. Repeatedly press button
, the symbol blinks on the display and
“-- C”
appears on the
display.
3. Turn the knob
!
to
“60C”
.
4. Press button
or wait 20 seconds to get automatic confirmation of the setting.
The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours
and 59 minutes.
To set the minute minder:
1. Leave knob
on
“0”
. The display shows the time of the day.
2. Press button
, the symbol blinks on the display.
3. Turn knob
!
clockwise. The set time blinks on the display. The appearance of the dash
“-”
indicates that the chosen time decreases until
“0”
is reached.
4. Press button
or wait about 20 seconds to get automatic confirmation of the setting.
Once the set time has elapsed:
An acoustic signal is heard and appears on the display.
Press the button
: The acoustic signal stops. The time of day appears again on the display.
 previous