Filter
Top Products
Surface Units and Reflector Bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surface units are OFF before
removing surface units and reflector bowls.
Failure to do so can result in burns or elec-
trical shock.
1.
Turn off all surface units
2. Litt the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
1. Pull the surface unit straight away
from the receptacle.
4. Litt out the reflector bowl. See
“Cleaning Chart” on page 23 for
cleaning instructions.
continued on next page
19