Filter
Top Products
ProductDimensions
26-3/4"
(67.9 cm)
depth with
handle
24-1/4" 29-7/8" (75.9 cm)
(61.6 cm) _._" width
42"
(106.7 cm)
overall
height
installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) counter-
top depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by 1/=,,(13 mm) minimum.
upperside
cabinetto
countertop I
,
Thisshaded area I
recommendedfor
wall or other com-
bustible material
This shaded area
recommended for
installation
of gas pipe.
10" (25.4 cm)
3" (5.1 cm)
(7.6 cm)---__
NOT_:: 24" (61 cm) minimum when bottom of wood or metal cab-
inet is protected by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal cabi-
net.
If installing a range hood or microwave hood combination above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.