Filter
Top Products
Solid Element Surface Units
Burn and Electrical Shock Hazard
Solid element surface units do not glow red when hot. Make sure all
controls are OFF and the range is COOL before cleaning. Failure to do so
can result in burns or electrical shock.
1. Turn off all surface units.
2. For best results, wipe off surface
units with a damp soft cloth and
soapy water after each use.
Burned-on food may be removed
with a soapy scouring pad. The
red spot in the center of the sur-
face unit will gradually wash off.
This is normal and will not affect
the operation of the surface unit,
3. IMPORTANT: After cleaning,
apply a thin coat of salt-free oil to
the CCCL surface units, then heat
3-5 minutes. It may still smoke
slightly when heated. If surface
units have dark spots caused by
grease and food, the oil treatment
will improve their appearance
but not eliminate the spots. NOTE:
Optional Electrol@ dressing can
be applied to the surface units
to improve their appearance.
16
4. The stainless steel trim rings will
gradually yellow from the heat of
the surface units and pans. This is
normal. The yellowing can be
removed by using stainless steel
cleaner or Cook Top Polishing
Creme on the trim rings.
To obtain order information for
Cook Top Polishing Creme (Part
No. 814009) or Electrols dressing
(Part No. 814030), write to:
Whirlpool Corporation
Attention: Customer Service Dept.
1900 Whirlpool Drive
LaPorte, IN 46305