Whirlpool RBD306 Oven User Manual


 
OvenLights
The oven lights are standard 4g-watt appliance bulbs. They will
come on when the oven door is opened. They will not work
during the Self-Cleaning cycle. When the oven door is closed,
press OVEN LIGHT to turn them on or off.
To Replace:
Before replacing, make surethe oven is off and cool.
1. Disconnect powe_
2. Turn the glass bulb cover in the back of the oven
countemlookwise to remove.
3. Grasp under door handle and carefully cloee door as far as it
will shut. Pull door out from the bottom.
3. Turn bulb counterclookwise to remove from eecket.
4. Replace bulb and bulb cover by turning clockwise.
5. Reconnect power.
OvenDoor
There is no need to remove the oven door for normal use.
However, it can be done if necessary.
Before removing or replacing, make sure all controls are off and
the oven is cool. The oven door is heavy. Use both hands, do not
lift or carry the door by the handle and another person to help is
suggested. Use care not to damage the outer finish.
To Remove:
1. Open the oven door all the way.
2. Insertshortend of door removalpins, included withthe oven,
intoboth hinge hangers. Two %2in. (4 mm) allenwrenches or
two nailsof similardiameter can be usedif doorremovalpins
have been misplaced. Do not removethe pinswhile the door
isremoved.
To Replace:
1. Make suredoor removal pins have not been removed, Fit
hinge arms intoslots inframe. Push inat lower cornerto
ensure hinge arms are fullyengaged,
2. Open the door completely and remove the door removal pins.
Save them for future use.
3. Close oven door. If the door does not operate freely, repeat
the process.
\
1
1. Insert small end of pin here
13