Surface Units and Reflector Bowls
2. Lift the edge of the unit opposite
the receptacle, just enough to
clear the reflector bowl (and trim
ring if you have porcelain-enamel
reflector bowls).
3. Pull the surface unit straight away
from the receptacle.
Replacing
4. Lift out the reflector bowl (and trin
ring if you have porcelain-enamel
reflector bowls). See Cleaning
Chart on page 24 for cleaning
instructions.
2. Line up opening in the reflector
bowl (and notch in the trim ring
you have porcelain-enamel
reflector bowls) with the surface
unit receptacle.