Filter
Top Products
Removing the crispers and crisper cover
To
remove the crispers:
1.
Slide crisper straight out to the stop.
2. Lii the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To
remove the cover:
I,
Push up the cover insert from the bottom,
then slide out with both hands.
2. Lii front of cover frame.
3. Lii wver frame up and out.
To replace the cover:
1.
2.
Pit back of wver frame into notch sup-
ports on back wall of refrigerator, then
lower the front into place.
Slide back of cover insert into place, then
lower the front.
I rm
Remove the
cover Insert.
Lilt the cover
front, then the
back
NOTE: Handle
glass insert
with care. It
could be
heavy.
bQ IIlk
Pull out to
the stop,
lift the
front and
pull again.
Adjusting the crisper cover track
(on some models)
For some models:
For your convenience, one
crisper may be larger than the other, and your
crisper wver may have an adjustable center
track so you can switch positions of the crispers.
This allows you to store celery
and
other longer
items in a crisper. You can adjust the wver
center track with the wver in the refrigerator by
removing the crispers and the wver insert.
To remove the center track:
1.
Push up the wver insert from the bottom,
then slide out with both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening
in cover.
To replace the center track:
1.
Insert rear end of track (with hole) into
opening in cover.
2. Lower front end of track into slot.
3. Make sure rear end of track has snapped
into place on underside of cover.