Whirlpool RT20DKXDN00 Refrigerator User Manual


 
Adjusting the freezer shelf
(on some models)
Adjust the freezer shelf to match the way you
use your freezer.
To remove the shelf:
1.
Lii entire shetf slightly.
2.
Move shelf all the way to one side.
3. Titt other side up and out of shelf
support cups.
4.
Pull shetf up and out.
To replace the shelf:
1.
Titt the shelf and insert into freezer
compartment.
2. Insert one end of the shelf all the way
into the center of the shelf support cups.
3. Lower other end of shelf and insert into the
shelf support cups.
4. Lower shelf into place.
NOTE:
The shelf should lower slightly and
lock into place. If the shelf does not appear
sturdy, make sure both ends of the shelf are
inserted into the shelf support cups.
Using the ice cube trays
If cubes
are
not used, they may shrink, The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove Ice:
1.
Hold tray at both ends.
2. Twist slightly.
14
WITH QUESTIONS OR COMMENTS