Filter
Top Products
33
PROBLEM
The display is showing
“PF”
“F” followed by a number
shows on the display
The indicator light(s)
is flashing
DISPLAY MESSAGES
CAUSE
•
There has been a power failure. Press the off/cancel pad to clear the display.
•
Press the off/cancel pad to clear the display. If an “F” code appears again,
call for service. (See “If You Need Assistance or Service” on page 34.)
•
The function(s) indicated may not be working. Refer to the section in this Use
and Care Guide discussing the function. If the indicator light(s) keeps flashing,
call for service. (See “If You Need Assistance or Service” on page 34.)
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 34.
TROUBLESHOOTING