Filter
Top Products
17
2. Set the new offset temperature.
Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature
setting. The minus sign shows the oven will be
cooler by the displayed amount. There is no sign
in front of the number when increasing the
temperature setting.
3. Enter the adjustment.
NOTE: The oven control will stay adjusted even
after a power failure.
How to determine the amount of
adjustment needed
The chart at the right tells you how much to adjust
the offset temperature to get the cooking results
you want. You can figure out cooking results by the
amount of browning, moistness, and rising times for
baked foods.
ADJUSTING THE OVEN TEMPERATURE CONTROL (CONT.)
TO COOK
FOOD ...
A little more
Moderately more
Much more
A little less
Moderately less
Much less
ADJUST BY
THIS NUMBER
OF DEGREES
(FAHRENHEIT)
+10
+20
+30
-10
-20
-30
PRESS YOU SEE
START
ENTER
5 SEC
(time of day)
PRESS YOU SEE
TEMP
(example when making oven
10°F cooler)
USING YOUR RANGE
BROILING
NOTES:
•
Do not preheat when broiling, unless your recipe
recommends it.
•
Leave the door partly open whenever you use
the oven to broil. This lets the oven stay at the
proper temperatures.
1. Place the rack where you need it.
You need to place the rack so that the surface
of the food is at least 3 inches away from the
broil element. See “Broiling guidelines” later in
this section.
Front of rack
Rear of rack
continued on next page