Filter
Top Products
28
PROBLEM
Nothing works
The oven does not work
The coil elements will not
work
Cannot boil on left front
element/ACCUSIMMER™
feature
ACCUSIMMER will not
simmer
ACCUSIMMER element
does not get hot enough
CAUSE
•
The range is not plugged into a properly grounded live outlet with the
proper voltage. (See Installation Instructions.)
•
You have blown a household fuse or tripped a circuit breaker.
•
The control knob is not set correctly. Push in the control knobs before
turning them.
•
You have not set the electronic control correctly. Refer to setting the
electronic oven control section. (See pages 12-20.).
•
You have blown a household fuse or tripped a circuit breaker.
•
The coil elements are not plugged in all the way. (See “Replacing” on
page 24.)
•
You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
•
Turn the ACCUSIMMER knob to NORMAL BURNER position .
•
Turn left front control knob to HI for a rapid boil.
•
Turn left front control knob on, along with the ACCUSIMMER knob.
•
Turn left front control knob to Max, along with turning the ACCUSIMMER
knob on.
TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see “Requesting Assistance or Service” on page 30.
RANGE DOES NOT WORK