Filter
Top Products
OVEN TEMPERATURE
OVEN
RIGHT REAR
CONTROL
SELECTOR CONTROL KNOB
OVEN SIGNAL
RIGHT FRONT
LIGHT
CONTROL KNOB
Using the surface units
Control knobs must be pushed In
before turning
them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a gulde.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-HI
Use MED Use MED-LO
foods cook- to hold a
for gravy,
to keep food
ing; to bring rapid boil; to
puddings cooking after
liquids to a
fry chicken
and icing; to starting it
boil. or pancakes.
cook large
on a higher
amounts of setting.
veaetables.
CAUTION: The use of the HI setlfng for long periods of tlme
can damage surface units and discolor chrome reflector
bowls. Start cooking on HI and turn control down to con-
ttnue cooklng.
Use Lo
to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
1
within the LO
band to keep
food at the
temperature
you want.
5