Filter
Top Products
35
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE: If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails
or screws may be used. Be careful that the length
of the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
To remove:
1. Open the door about halfway. Insert door
removal pins into both hinge hangers. Do not
remove them while the door is removed from
the range.
2. Close the door as far as the door removal pins
will let you.
3. Rotate the door toward the range. Lift up the
door until it stops. Do not use the door handle to
lift the door. Rotate the door toward the floor and
pull it toward you.
CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR
Insert door removal
pin here
Oven door
Range
Range
Rotate
Lift up
Oven door
Hinge
hanger