Filter
Top Products
The electronic oven control
\
Electronic
display
I
w
Auto clean pad
I
,
I
I
Start/Enter pad
(P.
13)
- OH/Cancel pad
(P. 13)
Custom broil
Tehperature pads
pad (P. 1s)
(PP. 13, 15, 17)
Display
Using the control lock
The control lock prevents unwanted use
of the oven by disabling the control panel
command pads.
When you first plug in the range, “PF”
will appear on the display until you press
any command pad. If “PF” again appears
on the display, your electricity was off for a
while.
When you are using the oven, the
display will show preheat times and
temperature settings.
When you are not cleaning or cooking
with the oven, the display will be blank.
When setting a function, if you do not
press the Start/Enter pad within five
seconds, the Start? Indicator Light will
flash. If you do not press the Stat-t/Enter
pad within five minutes, the function will
be canceled.
Indicator lights
An indicator light to the left of the display
lights up when you are in a setting. An
indicator light also lights up to tell you when
the door needs to be latched or when the
door is locked. An indicator light on the
display lights up when the oven is on.
NOTES:
l
The control lock is only available when
the oven is not in use or the control has
not been set.
l
Set the control lock when cleaning the
control panel to prevent the oven from
accidentally turning on.
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for five
seconds. A single tone will sound
and “Lot” will appear on the tem-
perature display for five seconds.
“Lot” will then appear whenever a
and pad is pressed.
To unlock the control panel:
nd hold the Start/Enter pad for five
seconds. A single tone will sound
and “Lot” will disappear from the
temperature display.
12