Filter
Top Products
The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
Personal Injury Hazard
To reduce risk of range tipping over, secure range with a properly
installed anti-tip bracket supplied with range or an optional floor-
mounted anti-tip bracket kit.
If range is moved for cleaning or service, check that anti-tip bracket is
engaged before using range.
Failure to follow the above precautions could result in personal injury.
To verify the anti-tip bracket
To verify the anti-tip bracket
is engaged (if you have a floor
is engaged (if you have a wall
bracket): brat ket):
l
Remove the storage drawer. (See page
19.)
Cable
(attached
to rear of
Rear
control
leveling leg
panel)
Floor bracket
l
Look to see if the anti-tip bracket is
attached to floor with screws.
l
Make sure one rear leveling leg is
positioned under the anti-tip bracket.
l
See Installation Instructions for further
details.
Wall bracket
l
Look to see if the anti-tip bracket is
attached with screws to the wall behind
the control panel.
l
Make sure the cable on the back of the
range is secured by the two hooks on the
bracket.
l
Cable must be unhooked from wall brack-
et to move range for cleaning or service.
Reconnect cable before using range.
l
See Installation Instructions for further
details.
Model RF361 BXD:
l
White (Kit No. 814071)
l
Almond (Kit No. 814072)
Optional door panel pat
If you would like to change the color of your
oven door glass to white or almond, you can
order one of these kits from your Whirlpool
Dealer. The kits include easy installation
instructions.
Model RF363PXD:
l
White (Kit No. 814324)
l
Almond (Kit No. 814325)
20