Whirlpool RF375PXE Range User Manual


 
17
USING YOUR RANGE
5. Press the start/enter pad.
A preheating time will count down on the display.
The heat, bake, and on indicator lights will light
up. The oven control automatically sets preheating
times based on the oven temperature you select:
For 245°F and less, the preheating time is
3 minutes.
For 250°F-445°F, the preheating time is
6 minutes.
For 450°F and above, the preheating time is
10 minutes.
The oven is preheated and ready to use when
you hear a 1-second tone, the on indicator light
goes off, the countdown is finished, and the set
temperature is displayed.
The preheat and set temperatures may be
different at the end of the countdown. This
is normal.
NOTES:
When the oven temperature is greater than
170°F, no preheating time will be shown in
the display.
You can change the temperature setting any
time after pressing the start/enter pad. You do
not have to press the start/enter pad again.
The preheating time will not change if you
reset the temperature before the countdown
time ends.
If you are baking/roasting while the minute
timer is counting down, you can see the set
baking/roasting temperature for 5 seconds
by pressing the bake pad.
BAKING/ROASTING (CONT.)
PRESS YOU SEE
ON
START
5 SEC
ENTER
(example for set temperature
of 350°F)
continued on next page