Whirlpool RF375PXY Range User Manual


 
5. Use the Hour and Minute pads to set the
desired start time.
Push
the ‘up” (A) or
“down” (V) pad(s) until the correct time
shows in the display.
This example shows a desired start time
of 2 o’clock.
6. Push
the Stop Time pad. The time of day
with the colon flashing will show in the
display, the Stop Time lndiitor Light will
light up, and the Start lime Indicator Light
will flash.
7.
Use
the Hour and Minute pads to set the
desired stop time.
Push
the ‘up”
(A)
or
“down” (V) pad(s) until the correct time
shows in the display.
This example shows a desired stop time
of 236. Thii provides a cook time of 36
minutes (the difference between the start
and stop times).
NOTE:
If you do not set a stop time within
5 minutes, the display will return to the
time of day.
8.
Push
the Start/Enter pad. The Delay
Indicator Light will light up in the display
to indicate that the oven is programmed
to start at a later time. The Start Time and
Stop Time lndiitor Lghts will flash.
NOTE: You can change
a
time setting
after pushing the Start/Enter pad by
repeating just Steps 4 and 5 or 6 and 7.
DELAY
24