Filter
Top Products
OPERATION AND CARE OF UNIT
FAN AND LIGHT CONTROL PANEL
FAN:
For best results, turn the fan on at the beginning of cooking and allow it to run until all smoke and odors are removed from the
room.
I
3.
TO TURN ON:
Touch the “ON” pad. The fan will start at the highest
speed. Touch the “UP ARROW” and the fan will start at
the lowest speed.
TO DECREASE SPEED:
Touch the “ON” pad again momentarily. Each time the
“ON” pad is touched and released, the motor speed will
decrease. If the “ON” pad is continuously depressed, the
speed will be reduced to the slowest speed. If the “UP
ARROW” is touched first, use instruction No. 3.
TO INCREASE SPEED:
Touch the “UP ARROW” momentarily. Each time the
“UP ARROW” is touched and released, the motor speed
will increase. If the “UP ARROW” is continuously de-
pressed, the speed will increase to its highest speed.
Speed may be increased or decreased anytime during
operation.
TO TURN FAN OFF:
Touch the “OFF” pad
LIGHT:
Do not use bulb larger than 60 Watts
FILTER:
For best results, remove and clean often. The filter may be placed in the dishwasher or washed in hot sudsy water.
EXTERIOR SURFACES:
Clean the range hood with a mild detergent-and soft cloth, Do not use abrasive cleansers or soapy steel
~001
pads.
Page 5