Filter
Top Products
To delay the start using Delay Start Time:
Push the Clean pad. Push the Delay Start
Time pad. START, TIME, CLEAN and “cln”
will light up. Use the Hour and Minute pads to
set the desired start time. Push the “up” (A)
or “down” (V) pad(s) until the correct time
shows in the display.
Push the Start/Enter pad. DELAY, CLEAN
and the time of day will light up in the display
to show that the oven is programmed to start
the Self-Cleaning cycle at a later time.
After the start time has been set, the
large display will go back to showing the
current time of day. DELAY and CLEAN will
stay on. When the start time is reached,
DELAY will go off, TIMED, CLEAN and
CLEAN TIME will light up and the oven will
start to clean.
4. After the Self-Cleaning cycle is started,
LOCKED lights up in the display when the
oven temperature goes above normal baking/
roasting temperatures. The Lock Lever must
not be moved and the door cannot be opened
when LOCKED is on.
5. After the Self-Cleaning cycle is completed,
the time of day will show in the display.
28