Filter
Top Products
Cleaning and caring for your range
CONTROL PANEL AND KNOBS
1.
First make sure lower oven and surface
unit control knobs are set on OFF. All knobs
pull straight off. Surface unit knobs have
a collar and spring.
3. Wash knobs and surtace unit collars In
warm soapy water. Rinse well and dry
2. Use warm soapy water and a soft cloth to
wipe the panel. Rinse and wipe dry.
Collar
\-
7\
Put small end
of sprlng
closest to
control
panel.
4. Push knobs straight back on. Make sure
they point to OFF. Make sure the collar and
spring on surface unit knobs are put to-
gether as shown.
SURFACE UNITS AND REFLECTOR BOWLS
REMOVING
I.
Be sure surface units are OFF and COOL.
3. Pull the surface unit svalght s&ay from the
receptacle
2. Lift the edge of the unit opposite the re-
ceptacle just enough to clearthe reflector
bowl.
4. Lrft out the reflector bowr
17