Filter
Top Products
CLEAN
OVEN TEMPERATURE
LIGHT
CONTROL
OVEN / LOc;<
\
OVEN
SELECTOR LIGHT
SIGNAL LIGHT
Using the surface units
Surface Unit Indicators
The solrd dot In the Surface Unit
Indicator shows which surface unit
IS turned on by that knob.
Signal lights
One of the signal lights WIII glow
when a surface unit
IS
on
Control knobs must be pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-HI
Use MED
Use MED-LO
Use LO
to
foods cook-
to hold a
for gravy,
to keep food
keep food
ing; to bring
rapid boil; to
puddings
cooking after
warm until
liquids to a
fry chicken
and icing; to
starting it
ready to
boil.
or pancakes.
cook large
on a higher
serve. Set the
amounts of
setting.
heat higher
vegetables.
or lower
CAUTION: The use ot the HI setttng for long
periods of time
within the LO
can damage surface units and discolor chrome trim
rlngS.
band to keep
Start cooking on HI and turn control down to continue
food at the
cooklng.
temperature
you want.
5