Filter
Top Products
Surface Burners
Lift up the cooktop, following the instructis
1s on page1 1.
-
Wipe oft surface burners with warm soapy water and a soft cloth after each
use.
Occasionally check surface burner flames for size and shape as shown. If
flames do not burn properly, you may need to remove the surface burners for
cleaning (see pagel5), or call a qualified technician for burner adjustments.
To adjust the LO settings on the control knobs:
1.
Turn on the surface burners, then set the controls on LO,
2. WIthout changing the burner settlngs,
remove the control knobs.
3. Firmly grasp the control stem and insert a small bladed screwdriver into
the end of the stem. Turn the screwdriver in either direction until the flame
height is
Ya
in
(38
cm) or lower in size.
Flame must be large enough to
malntaln a STABLE FLAME on all burner pork.
NEVER ADJUST THE FLAME SIZE AT THE MEDIUM SETTING.
The Upper Oven Rack Guides
Removing the upper oven rack, rack guides and burner cover will help make
it easier to clean the upper oven.
a
I
REVERSE THE PROCEDURE TO REPLACE BURNER COVER, RACK GUIDES
,* AND RACK.