Filter
Top Products
Removing the base grille
To remove the grille:
1.
Open both doors.
2. Pull base grille forward to release the support tabs
from the metal clips.
3.
Do not remove Tech Sheet
fastened behind
the grille.
To replace the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and con-
denser coils on page 21.
Condenser coils
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the
refrigerator or disconnect the electricity leading
to it at the main power supply.
Failure to do so could result in personal injury.
To change refrigerator light:
1.
Disconnect refrigerator from power supply.
2.
Reach behind the Control Console to remove bulb.
3.
Replace bulb with a 40-watt appliance bulb.
4.
Reconnect refrigerator to power supply.
To change crisper light:
1.
Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
‘x@*iefrigerator light
isper
light
18