Filter
Top Products
I
I’
if you are using a Cook
Power other than HIGH.
When the cooking time
ends, “End” will show on
the Display and 4 beeps
BEEPBEEP~EEPBEEP
will sound. (You can stop
the beeping by opening
the door or by touching
CANCEL.) “End” will remain
on the Display and a beep
will sound every 30 sec-
onds until the door is
opened or CANCEL is
touched. The Display will
then show the time of day.
NOTE: If the oven light and fan come on when you touch START, the
Start Time feature has not been set correctly. Open and close the door,
reprogram the cooking sequence and START TIME, then touch START.
Additional Information
l
Additional cycles can be set when using START TIME to start cooking at a
latertime. Follow instructions underthe proper heading (Using AUTO SET,
Cooking with the Temperature Probe, Defrosting, Using KEEP WARM before
you program START TIME.
l
You can change time, or add cycles at any time during the Start Time
cycle.
I. Touch the cycle you wish to change or add.
2. Touch Number Pads for new time.
3. Touch COOK POWER, if desired.
4. Touch number of new Cook Power, or touch COOK POWER again if High
is desired.
*
5. Touch START. The oven will cook at the new time and Cook Power.
l
Opening the door does not stop the START TIME operation.
CAUTION: Use foods that will not go bad or spoil while waitlng for cook-
ing to start. Avold using with milk or eggs, cream soups, cooked meats,
poultry or fish, or any Item with baking powder or yeast.
Smoked or frozen meats may be used; so can vegetables, fruits and
casserole-type foods.
Any food that has to wait for cooking to start should be very cold or
frozen before lt is put in the oven. MOST UNFROZEN FOODS SHOULD
NEVER STAND AT ROOM TEMPERATURE MORE THAN TWO HOURS BEFORE
COOKING STARTS.