Filter
Top Products
1-1/2”
(3.8 cm)
Power Supply Cord–Drill hole
1
Preferred location
Preferred location
Preferred location
Optional location
Optional location
Optional location
Drill a 1-1/2” (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.
NOTE: A grounded 3 prong outlet is required inside a
cabinet next to the dishwasher cabinet opening.
WARNING
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Disconnect power
1
Shut off the water supply to the dishwasher.
2
Shut off water supply
Water line
Cable
Do you already have utility
hookups?
3
Existing utility hookups No existing utility hookups
Yes
—Follow instructions in the “Prepare Cabinet
Opening—Existing Utilities” section.
No
—Follow instructions in the “Prepare Cabinet
Opening—New Utilities” section.
6
INSTALLATION INSTRUCTIONS
Prepare Cabinet Opening—New
Utilities
What type of electrical
connection will you use?
Power Supply Cord:
Follow Option A instructions
Direct Wire:
Follow Option B instructions
Prepare and route the electrical supply
Option A, Power Supply Cord:
6”
(15.2 cm)
1
Water line
Cable
Check water and electrical
placement
If the water line and the cable extend to the locations
shown, proceed to the “Install Drain Hose” section. If they
do not reach far enough, follow the instructions in the
“Prepare Cabinet Opening—New Utilities” section.
Prepare Cabinet Opening—Existing
Utilities