12
4. Take the new filter out of its packaging and remove the
covers
from the O-rings. Be sure the O-rings are still in
place
after the covers are removed.
5. With the arrow pointing up, align the new filter with the filter
housing and slide it into place. The filter cover door will
automatically begin to close as the new filter is inserted.
6. Close the filter cover door completely in order to snap the
filter
into place. You may need to press hard.
7. Flush the water system. See “Water Dispenser” or “Water
and
Ice Dispensers.”
Install Air Filter
(on some models)
The air filter reduces the buildup of odors. This helps to maintain
a
cleaner environment inside the refrigerator.
On some models, your refrigerator's accessory packet includes
an
air filter, which must be installed prior to use. On some models,
the air filter is already installed at the factory.
Installing the Air Filter
Install the air filter behind the vented door, located along
the
rear interior wall of the refrigerator compartment.
1. Remove the air filter from its packaging.
NOTE: An air filter status indicator is included with the air filter.
The indicator is not needed for models that display the air filter
status on the control panel.
2. Lift open the vented door.
3. Snap the filter into place.
Air Filter Status Indicator
The control panel displays the Air Filter status.
■ GOOD - The air filter icon on the control panel lights
up
in BLUE.
■ ORDER a replacement - The air filter icon on the control
panel
lights up in YELLOW.
■ REPLACE air filter - The air filter icon on the control panel
lights
up in RED and “Replace Filter” will appear.
■ EXPIRED - The air filter icon lights up in RED and “Replace
Filter” flashes on the control panel.
After replacing the air filter, press and hold the AIR FILTER
button
for 3 seconds. The filter icons will turn off. See “Using
the
Control(s).” When the system is reset, the air filter icon
will
return to its BLUE color and the words “Replace Filter”
will
disappear from the control panel.
NOTE: At any filter status, pressing and holding the AIR FILTER
button for 3 seconds will reset the air filter status to Good and
the air filter icon will turn off.
Replacing the Air Filter
The disposable air filter should be replaced every 6 months,
or
when the status indicator air filter icon turns on and starts
flashing when the refrigerator door is opened.
To order a replacement air filter, contact us. See “Accessories.”
1. Remove the used air filter by squeezing in on the side tabs.
2. Install the new air filter and reset the status indicator using
the
instructions in the previous section.
Install Produce Preserver
(on some models)
The accessory packet includes two produce preserver pouches,
which should be installed in a crisper drawer prior to use.
NOTE: For best performance, always use two pouches.
The produce preserver absorbs ethylene, to slow the ripening
process of many produce items. As a result, certain produce
items
will stay fresh longer.
Ethylene production and sensitivity varies depending on the type
of
fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate to high amounts of ethylene.
Installing the Produce Preserver
Produces Ethylene
Very
Low
Low High Very
High
Sensitivity
to Ethylene
High Broccoli
Lettuce
Spinach
Apples
Pears
Med. Asparagus
Citrus fruit
Cantaloupe
Low Carrots
Grapes
Berries
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.
FIRST AID TREATMENT: Contains potassium
permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.