Filter
Top Products
22
Temperature and Moisture
PROBLEM POSSIBLE CAUSES SOLUTIONS
Temperature is too warm The refrigerator has just been installed Allow 24 hours following installation for the refrigerator
to
cool completely.
Cooling is turned off Turn on cooling. See “Using the Controls.”
The controls are not set correctly
for
the surrounding conditions
Adjust the controls a setting colder. Check the temperature
in
24 hours. See “Using the Control(s).”
The door(s) are opened often
or
not closed completely
Allows warm air to enter refrigerator. Minimize door openings
and keep doors fully closed.
A large load of food
was
recently added
Allow several hours for refrigerator to return
to
normal temperature.
Temperature is too cold
in
the refrigerator/crisper
The refrigerator air vent(s) are blocked If the air vent located in the top, left, rear corner of the
refrigerator compartment is blocked by items placed directly
in
front of it, the refrigerator will get too cold. Move items
away
from the air vent.
The controls are not set correctly
for
the surrounding conditions
Adjust the controls a setting warmer. Check the temperature
in
24 hours. See “Using the Controls.”
The ice storage bin is not in the correct
position
See “Ice Maker.”
Temperature is too cold
in
the pantry drawers
The control is not set correctly
for
the items stored in drawer
Adjust the control setting. See “Refrigerator Features.”
There is interior
moisture
buildup
NOTE: Some moisture
buildup is normal.
The room is humid A humid environment contributes to moisture buildup.
The door(s) are opened often or not
closed completely
Allows humid air to enter the refrigerator. Minimize door
openings and close doors completely.
The door is blocked open Move food packages away from door.
A bin or shelf is in the way Push bin or shelf back into the correct position.
Storing liquid in open containers This adds humidity to the refrigerator interior. Keep all containers
tightly covered.
There is frost/ice buildup in
the freezer compartment
The doors are opened often or
left
open
Minimize door openings and keep doors fully closed.
Poor door seal Ensure door seals are making full contact with the refrigerator
cabinet to allow for an adequate seal.
Temperature controls are not
set
correctly
See “Using the Controls” for recommended
temperature
settings.