Filter
Top Products
Cycles and options (Model WU565OX )
Pots & Pans cycle
A double wash where water is heated
during the first wash and rinse for
maximum cleaning of cooked-on or
baked-on foods.
Push the POTS & PANS Cycle Selector
Button and select the mark next to POTS
& PANS with the Cycle Control Knob.
The cycle sequence will be:
Wash+Rins.e+Rmse+Wash+Rinse+Rinse+
Rinse-+Dry+Off
Heavy Wash cycle
A double wash for heavily soiled loads.
Push the HEAVY WASH Cycle Selector
Button. Select the mark next to HEAVY
WASH with the Cycle Control Knob. The
cycle sequence will be:
Wash-Rinse+Rinse-+Wash+~Rinse+
Rinse+Dry-+Off
Normal Wash cycle
A double wash for normal, everyday
loads. (The Energy Guide Label data is
based on this cycle.)
Push the NORMAL Cycle Selector Button
and select the mark next to NORMAL
WASH with the Cycle Control Knob. The
cycle sequence will be:
Wash+Rinse+Wash+Rinse+Rinse+
Rinse+Dry+Off
Light Wash cycle
A single wash for pre-rinsed or lightly
soiled loads.
Push the LIGHT WASH Cycle Selector
Button and select the mark next to
LIGHT WASH and with the Cycle
Control Knob. The cycle sequence will
be:
Rinse+Wash+inse+RRinse+Dry+Off
Rinse & Hold cycle
For rinsing a few items to be washed
one or more days later.
Select the mark next to RINSE & HOLD
with the Cycle Control Knob. Push the
ENERGY SAVER DRY Option Selector
Button. Using the Heat Dry option may
cause food to bake on dishes. The cycle
sequence will be:
Rinse+Rinse+Off
Energy Saver Dry option
Air in the dishwasher is automatically
heated during the “dry” part of all
cycles.
If the ENERGY SAVER DRY Option
Selector Button is pushed, air in the
dishwasher is not heated. Using this
option helps save energy, but dishes
take longer to dry (overnight) and some
water spotting may result. Some items
(such as plastics) may need towel
drying.
For best drying results, use a liquid rinse
agent.
Hi-Temp Washing option
When the I-II-TEMP
WASHING
Option
Selector Button is pushed, water is
heated during the first wash in the
Heavy Wash cycle and the final rinse in
all cycles.
Using DELAY HOURS
1. Push desired Cycle Selector Button.
2. Push desired Option Selector
Buttons.
3. Turn Cycle Control Knob clockwise
to the number of hours you want
the dishwasher to delay before the
selected cycle starts.
4. Close and latch the door.
NOTE:
. You can add items while time is
counting down. Close and latch the
door. The timer will not advance if
the door is unlatched.
a The Light Wash cycle can not be
delayed.
Page 5