Filter
Top Products
5
Reverse Door Swing (optional)
1. Remove the upper hinge pin from the right side of the cabinet
and reinstall it on the left side. See Graphic 2.
2. Remove the plastic cap from the top left side of the door
frame and reinstall it on the top right side of the door frame, in
the previous pin location. See Graphic 1.
3. Reposition the door on the cabinet and push up until the top
hinge pin is inserterted into the top of the door.
4. Remove the bottom left leveling leg and transfer it to the right
side. See Graphic 5.
5. Remove the two retaining screws on the bottom left side of
the cabinet and reinstall them on the right side in the former
lower hinge assembly screw positions. See Graphic 6.
6. With the door closed, reinstall the lower hinge assembly on
the left side of the wine cellar. See Graphic 3.
7. Reinstall leveling leg. See Graphic 4.
Final Steps
1. Stand the wine cellar upright and verify the door
aligment and proper seal against the cabinet.
2. Let stand upright for 60 minutes.
3. Plug in wine cellar or reconnect power.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A. Plastic Cap
1
A
A. Top Hinge Pin
2
Bottom Hinge
Top Hinge
A. Hinge Washer
B. Bottom Hinge Pin
C. Screw Washers
D. Spacers
E. Hinge Screws
3
Leveling Leg
5
Leveling Leg
for Bottom Hinge
4
A
A
B
C
D
E
A. Screw Washers
B. Spacers
C. Retaining Screws
6
A
B
C