Filter
Top Products
7
Changing the Temperature Display
To change the display from Farhenheit to Celcius, press the °F/°C
button. An indicator light will show which unit of measure is
selected.
Lighting the cabinet
Press the light selector button to turn the interior light on. This will
set the light to be on at all times. Press the light selector button
again to turn the light off. This will allow the light to come on only
when the door is opened.
Lock
The wine cellar is equipped with a lock that is located at the
top and center of the door frame. To lock the wine cellar,
insert the key all the way into the lock and turn clockwise.
To unlock, turn the key counterclockwise.
WINE CELLAR CARE
Cleaning
Clean the wine cellar about once a month to avoid build-up
of odors. Wipe up spills immediately.
To clean your wine cellar:
1. Unplug wine cellar or disconnect power.
2. Remove all racks from inside the wine
cellar.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth. For additional protection against
damage to painted metal exterio
rs, apply appliance wax (or
auto paste wax) with a clean, soft cloth. Do not wax plastic
parts.
5. Replace the racks.
6. Plug in wine cellar or reconnect power.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Wine Racks
To Remove and Replace the Wine Racks
1. To remove a rack, tilt the rear of the rack up and pull forward.
2. To replace the rack, place the rack on the support brackets
and push the rack down until it locks into place.
Stocking the Wine Cellar
The wine cellar has a maximum capacity of 36 bottles of wine,
when configured as outlined below.
To Stock the First Six Racks
To Stock the Staggered Bottom Rack
1. Starting at the left-hand side, place the bottom of the first
bottle against the back of the wine rack in the rear left corner.
2. Place the second bottle beside the first with the bottom of the
bottle aligned with the front trim of the wine rack.
3. Continue in this manner for the next 3 bottles.
4. Place the base of the fifth bottle in
the right rear corner of the
rack.
Each rack holds up to 5 bottles when stocked as per Fig.A
Fig.A
1. Load the bottom level of the staggered rack with up to
3 bottles, with the base of the bottle against the left-hand
side of the cabinet.
2. Load the top level of the staggered rack with up to 3
bottles set in same manner as in step 1.