Filter
Top Products
28
8
9
5
6
7
Probe Connection is good and 5-min countdown started
Indicator first LED dot
WINE Temperature Indicator
LED Screen
Wine Temperature Reading
Temperature SET Indicator UP Arrow Button DOWN Arrow Button
Unit ON Indicator SET Temperature Button
1. Wine Temperature Indicator: A red LED bar will light up when the thermostat is reading the liquid temperature in the bottle via
the probe. This will remain lit and the temperature you see displayed is what the probe is reading.
2. Probe Connection: Indicator lights up with a little red dot; this will remain lit while the 5-minute countdown is in sequence.
3. LED Screen: Displays your thermostat readings.
4. Wine Temperature Reading: The temperature reading the probe in the bottle of water is registering to the thermostat, which then
displays that number to you.
5. Temperature SET Indicator: A red LED bar will light up when you are setting the temperature you wish to keep your wine
collection at.
6. Unit ON Indicator: A red LED bar will light up every time the unit turns on to run a cooling cycle.
7. SET Button: Used to set the temperature you want the unit to maintain.
8. UP Arrow Button: Used with the SET button to set temperature higher. Also by pressing and holding button it will allow you to see
the 5-minute count down.
9. DOWN Arrow Button: Used with the SET button to set temperature lower.
*Up and Down Arrow Buttons used simultaneously will change the temperature read out from Fahrenheit to Celsius*
WINE
WhisperKOOL
ON
SET
HIGH
PRESSURE
55F
SET
1
3
2
4