Whynter BWR-33SD Refrigerator User Manual


 
13
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE
Turn off the power, unplug the appliance, and remove all items including shelves.
Wipe the interior with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to one quart of water.
Wipe the shelves with a mild detergent solution.
Wipe the outside cabinet with warm water and mild liquid detergent.
Do not use steel wool or steel brush on the stainless steel. These will erode the stainless steel and
rusting may occur.
PREMISES POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be out for
an extended period of time, you need to take the proper steps to protect your contents.
VACATION TIME
Short vacations: Leave the appliance operating during vacations of less than two days
Long vacations: If the appliance will not be used for an extended period, remove all items and turn
off the appliance. Clean and dry the interior thoroughly.
MOVING YOUR APPLIANCE
Remove all items inside the appliance.
Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your
appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape (we recommend using painter’s tape) the door shut.
Be sure the appliance stays secure in the upright position during transportation and protect the
exterior of appliance with a blanket, or similar item.
ENERGY SAVING TIPS
The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of any direct sunlight.
Ensure that the appliance is adequately ventilated. Never obstruct the air vents.
Close the door tightly and do not open the appliance too frequently or for a long period of time.
CAUTION: Failure to unplug the appliance could result in electrical shock or personal
injury.