Filter
Top Products
7
1. When the freezer is plugged in to a power outlet, press the “Set” button. The LED
will display the factory pre-set temperature of 0°F
2. To adjust the temperature:
a. Press the “Set” button again
b. While the LED is flashing, press the “▲” or “▼” buttons to reach the
desired temperature
c. Once the desired temperature is set, the LED stops flashing. The current
internal temperature will then be displayed. After the LED has stopped
flashing, you can check the set temperature by pressing the set button
again
d. To change the preset temperature again repeat steps a., b. and c.
Note: Do not use the refrigerator-freezer as a refrigerator when the ambient
temperature is lower than 41°F
Fresh foods should NOT be stored together with frozen foods.
When the temperature is set below 32°F, do not keep glass-bottled drinks such
as beer and lemonade or soda cans, as the glass and cans might shatter.
When the ice layer on the inner cabinet sides is over 0.2”, the defrosting operation
should be performed to improve the refrigerating efficiency. To do this, follow these
steps below:
1. Turn off the power, and remove all items inside the freezer.
2. Allow the ice to completely melt.
3. Turn the unit to drain out the water. Once the unit is defrosted and all the water
has drained out, clean the interior with a soft rag before using the unit.
Tip: To remove unpleasant odors place a piece of charcoal in the chest.
Temperature Adjustment
Defrosting and Deodorizing
Food Storing
Never remove ice with a sharp object or screwdriver.