Filter
Top Products
8
REVERSING THE DOOR POSITION
Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
1. To access the lower hinge assembly, tilt back
the refrigerator cabinet or lay the refrigerator
on its back
2. Remove both legs located at the front of the
cabinet: adjustable left on hinge side and fixed
leg on opposite side.
3. Remove the screws holding the lower hinge
assembly to the cabinet
4. Remove the main door assembly from the
refrigerator cabinet by opening the door and
pulling down.
5. Remove the screws from the middle hinge
assembly. Then remove the hinge and freezer
door.
6. Remove the top cover, hinge, and screws
7. Re-install the top hinge pin on the opposite
side of the cabinet
8. Remove the door plugs and door bushing
located on the top and bottom of each door
assembly
9. Interchange positions of plugs and bushings
on both doors
10. Re-install door assembly on cabinet
11. Re-install the middle hinge assembly on the
opposite side
12. Make sure the door assembly is properly
aligned on the cabinet, before tightening
hinge screws
13. Re-install the main door assembly on cabinet
14. Re-install the lower hinge assembly on the
opposite side
15. Make sure to change bushing and screw on
opposite sides on bottom of unit
16. Make sure the door assembly is properly
aligned on the cabinet, before tightening lower
hinge screws
17. Re-install both legs (reversed from the original
positions: adjustable leg on hinge and fixed
leg on opposite side.)