Whynter wc-201td Refrigerator User Manual


 
Page 5
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using your Wine Cooler, follow these basic
precautions:
Read all instructions before using your Wine Cooler
An empty cooler can be a hazardous for children or small pets. If disposing of the cooler, remove
gasket seals, latches, lids or the entire door from your unused Wine Cooler, or take other action to
ensure the cooler is harmless.
Never allow children to operate, play with, or crawl inside the Wine Cooler.
Never clean Wine Cooler parts with flammable fluids or harsh chemicals. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any
other Wine Cooler. The fumes can create a fire hazard or explosion.
Before using your Wine Cooler
Remove the exterior and interior packing.
Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation Introduction
The Wine Cooler is designed to be for free standing installation.
WARNING: Do not store or install the Wine Cooler outdoors.
CAUTION: This Wine Cooler is designed for storing and cooling wines. Do not store perishable
food, medicine or other medical products.
Place your Wine Cooler on a hard and level floor that is strong enough to support it when it is
fully loaded.
To level your Wine Cooler, adjust the leveling legs at the bottom of the Wine Cooler if needed. We
do not recommend installing the Wine Cooler on carpet.
For free standing installation, 6” of space from the back and 4” from both sides of the Wine
Cooler are suggested. NOTE: DO NOT install the Wine Cooler near an oven or other heating
source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. For best performance, do not install the Wine Cooler behind a cabinet door or block
the vents.
Avoid locating the Wine Cooler in area that may be exposed to excessive moisture.
Plug in the Wine Cooler into an exclusive, grounded wall power outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a qualified electrician or an
authorized service center.