Filter
Top Products
Page 6
Parts and Features
1
Hinge Cover
7
Light Switch
2
Light
8
Magnetic Door Seal
3
Fan Mask
9
Glass
4
Shelf
10
Door Handle
5
Foot
11
Door Frame
6
Water Box
Note: Your specific model of Wine Cooler may differ slightly from the diagram above but its operation is
essentially the same.
Installation
1. Remove all packaging.
2. Set up the Wine Cooler on a level surface. Make sure you have at least 4” clearance on each side and
6” clearance in the back for ventilation.
3. Clean the interior surface with warm water and a soft cloth.
4. Insert power cord into a power socket. Make sure the power socket is grounded 110v ~AC / 60 Hz
socket.
5. Fill the Wine Cooler with your choice of wine bottles. Allow up to 24 hours of operation for the bottles
to reach the desired temperature.