Filter
Top Products
10
F. Completely finished .
A. Remove the pre-mounted
6” round duct opening.
B. Put transition plate by first
installing on the
half round section.
(Optional)
4 screws
C. Take the rectangular starting
collar. (Optional)
D. Overlap the rectangular
starting collar on the top
of transition plate.
E. Mounting rectangular starting
collar with remaining screws.
K. Vertical Rectangular DuctingK. Vertical Rectangular Ducting
An optional kit for vertical
rectangular ducting :
NOTE :
Transition plate
Rectangular
starting collar
+
(Small)
Half round section