Wolf CTEWH36 Ventilation Hood User Manual


 
9
WOLF COOKTOP LOW-PROFILE HOOD USE & CARE
GREASE FILTER(S)
30" (762) and 36" (914) low-profile wall hoods
have one aluminum mesh grease filter and the
45" (1143) wall hood has two. The low-profile
island hood also has two grease filters.
The grease filter(s) should be cleaned at
regular intervals, depending on use. The
(F)
icon in the hood controls will illuminate to
indicate when the grease filter(s) should be
cleaned. This indicator light comes on after
approximately 30 hours of operation. To reset
the hour counter, touch the
(F)
control pad
while the icon is illuminated.
IMPORTANT NOTE:
You may need to clean
the filter(s) more often if your cooking style
generates large amounts of grease, like frying
foods or wok cooking.
Grease filter removal—wall hood
shown
GREASE FILTER REMOVAL
To access the filter(s), gently press up on the
front edge and allow the panel to rotate
downward as shown in the illustration below.
Push the handle outward and pull the filter
downward to remove.
The aluminum mesh filter(s) and stainless steel
filter cover(s) are dishwasher safe and are
designed to fit most dishwashers. Place filter(s)
and filter cover(s) into the dishwasher at
approximately 140˚F (60˚C), or hand wash,
using a biodegradable detergent.
When filter(s) are dry, reinstall using the
reverse procedure.
IMPORTANT NOTE:
DO NOT operate the
ventilation hood without the filter(s). This may
cause damage to the blower or other internal
components of the hood.