Wolf CTWH36 Ventilation Hood User Manual


 
Planning Information
Model CTWH36 Cooktop Wall Hood
6
Dimensions in parentheses are in
millimeters unless otherwise specified.
(B)
FLOOR TO
COUNTERTOP
HEIGHT
(A)
TOTAL
FLOOR TO
CEILING
HEIGHT
(C)
COUNTERTOP
TO BOTTOM
OF HOOD
(F)
MAXIMUM
HEIGHT OF
HOOD
(D)
BOTTOM
OF HOOD TO
MINIMUM FLUE
EXTENSION
(E) UPPER FLUE TOTAL
HEIGHT TO CEILING
COOKTOP HOOD PLACEMENT
Wolf cooktop wall ventilation hoods come with a telescopic
chimney flue that allows you to reach a ceiling height of 8' (2.4 m)
to 9' (2.7 m) with a finished look. A flue extension to accommo-
date 10' (3 m) ceilings is available as a sales accessory.
Installation of the wall hood should be 24" (610) to 30" (762)
from the bottom of the hood to the countertop.
IMPORTANT NOTE: 8' (2.4 m) ceilings will not allow for a 30"
(762) maximum height above the countertop. Based on a 36"
(914) high countertop, an 8' (2.4 m) ceiling will allow for a
maximum height above the countertop of 27
5
/16" (694).
IMPORTANT NOTE: Both sections of the telescopic chimney flue
must be installed in order for the chimney to be lifted for service.
To determine placement of the cooktop wall hood, you must
calculate the height of the telescopic chimney flue. Refer to the
illustration and chart below.
To calculate the height of the telescopic chimney flue:
1) First measure A (total kitchen height from finished floor to
finished ceiling height).
2) Next measure B (height from finished floor to countertop).
3) Then determine the minimum C value (distance from
countertop to bottom of hood). Refer to the chart for ceiling
heights from 8' (2.4 m) to 9' (2.7 m). Dimension C must be
greater than 24" (610) and less than 30" (762).
4) To determine the upper flue section height: E=A-(C+B+D).
IMPORTANT NOTE: If dimension E falls between 0" (0) and
1
/2" (13), you will need to modify the flue to affix to the flue
attachment brackets. For ease of installation, Wolf
recommends that dimension E be no less than
1
/2" (13).
MODEL CTWH36
(A) (B) (C) (D) (E) (F)
96" (2438) 36" (914) 24" (610) min 32
11
/16" (830) 3
5
/16" (84) 50
7
/8" (1292)
96" (2438) 36" (914) 27
5
/16" (694) max 32
11
/16" (830) 0" 50
7
/8" (1292)
108" (2743) 36" (914) 24" (610) min 32
11
/16" (830) 15
7
/16" (392) 50
7
/8" (1292)
108" (2743) 36" (914) 30" (762) max 32
11
/16" (830) 9
5
/16" (237) 50
7
/8" (1292)
Letters correspond to those in the illustration.