Wolf WKGD ML-126621 Oven User Manual


 
– 14 –
MANUALLY SETTING THE TEMPERATURE AND COOK TIME
To Set the Temperature
Press the SET button. Press the TEMPERATURE button;
StPt
displays to indicate Setpoint.
Use the Up and Down Arrow keys to increase or decrease the displayed Temperature value.
Press the SET button again to save the Temperature setpoint in the computer.
To Set the Cook Time
Press the SET button. Press the TIME button.
Tine
displays to indicate TIME.
Use the Up and Down Arrow keys to increase or decrease the displayed Cook Time (HR:min).
Press the SET button again to save the Time setting in the computer.
To Start Cooking
Press the START / STOP button.
The manual Cook Time counts down to 00:00. Displays [HR:Min] above 1 hour; [min: sec] below.
The buzzer will sound. To silence the buzzer, press the START / STOP button again.
* The control retains the manual settings for Temperature and Time.
TO PROGRAM MENU ITEM and RACK # Cook Times
Factory Preset and Programmable Cook Times are shown in the table, below:
The Primary indicator light with Menu 1 / 2 selects Menu Item 1 (Factory Preset Cook Time = 10
minutes). The Secondary indicator light with Menu 1 / 2 selects Menu Item 2 (Factory Preset Cook Time
= 15 minutes). Similarly, for Menu Buttons 3 / 4 or 5 / 6. Any Menu Item Cook Time can be changed
using the procedure below. Rack # Cook Times may be programmed if desired but are not required.
To Change the Time Setting for any Menu Item (1 – 6)
To enter program mode, press and hold the Up and Down arrow buttons until PrOG displays.
Select the Menu Item to be programmed (1 – 6).
Tine
displays to indicate TIME. Use the Up and
Down arrow buttons to increase or decrease the Menu Item's COOK TIME. Repeat this step for
any other Menu Items.
Press the START / STOP button; LOC displays. Press the START / STOP button a second time
to save the Menu Item(s)' COOK TIME(s).
Press the START / STOP button once to begin cooking (with the Menu Item's Cook Time). To
exit, press the START / STOP button a second time.
To Program Individual Rack # Cook Times for a Menu Item
To enter program mode, press and hold the Up and Down arrow buttons until PrOG displays.
Select the Menu Item to be programmed (1 – 6);
Tine
displays to indicate TIME.
Then select the Rack # (1 – 5). [
t 1
] indicates Rack #1; [
t 2
] indicates Rack #2; ... [
t 5
] indicates
Rack #5. Use the Up and Down arrows to increase or decrease the COOK TIME for any Rack #.
Press the START / STOP button;
LOC
displays. Press the START / STOP button a second time
to save the Menu / Rack #'s COOK TIME(s).
To exit program mode, press START / STOP twice.
NOITCELESUNEM
UNEM
METIMETI
METI
METIMETI
TESERPYROTCAF
METIUNEMMETIUNEM
METIUNEM
METIUNEMMETIUNEM
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
SEULAVELBAMMARGORP
METIUNEM
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
1KCAR
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
2KCAR
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
3KCAR
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
4KCAR
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
5KCAR
EMITKOOCEMITKOOC
EMITKOOC
EMITKOOCEMITKOOC
yramirP2/11.nim01
yradnoceS2/12.nim51
yramirP4/33.nim02
yradnoceS4/34.nim52
yramirP6/55.nim03
yradnoceS6/56.nim53