Filter
Top Products
Warming Drawer Use & Care 7
wolfappliance.com
Sabbath Mode
S
abbath mode is for certain religious observances where
some warming drawer functions need to be turned off. In
S
abbath mode, the automatic shut-off feature is disabled,
allowing the warming drawer to operate continuously.
TO INITIATE SABBATH MODE:
1) Warming drawer must be OFF.
2) Touch and hold for 5 seconds. The word “Sab”
will flash in the LCD display after 5 seconds.
3) While “Sab” is flashing, select one of the PRESETS or
set the temperature with the or arrow
pads. Touch the arrow to increase the tempera-
ture and the arrow to decrease the temperature.
Two tones will signify that the Sabbath mode has been
initiated.
4) In Sabbath mode, the warming drawer will operate
continuously until is touched. The word ON will
remain illuminated in the LCD display all the while the
unit is in Sabbath mode. No other read-outs will
appear in the LCD display.
5) Touch to shut off the warming drawer and exit
Sabbath mode.
Electronic Controls
P
RESET PROGRAMMING
Preset temperatures and time settings can be adjusted for
the , , and PRESETS.
The temperature range is 26–43°C. The ,
a
nd PRESETS can be adjusted from 26–93°C.
TO ADJUST PRESETTEMPERATURE AND TIME SETTING:
1) Warming drawer must be OFF.
2) Touch .
3) Touch and hold the desired PRESET, , ,
or for 5 seconds. The word TIMER will illuminate
and “4:00” will flash in the LCD display along with the
temperature. Adjustments to the settings should be
made within 30 seconds. The unit will exit the preset
programming mode if no adjustment is made within
this time.
4) To adjust the temperature, touch and hold the
arrow to increase or the arrow to decrease the
temperature until the desired preset temperature is
shown in the LCD display.
5) To adjust the time setting, touch and hold the
arrow to increase or the arrow to decrease the
time until the desired preset time setting is shown in
the LCD display.
6) Touch and hold the adjusted PRESET again for 5
seconds. Three quick tones will signify that settings for
the PRESET have been changed. If 30 seconds elapse
before you touch and hold the PRESET, the unit will
exit the preset programming mode with no adjustments
made.
When Sabbath mode is initiated, the automatic shut-off
is disabled, requiring the unit to be turned off manually
by touching .
Before Using for the First Time
R
emove all literature and packaging materials from inside
the warming drawer.
Clean your warming drawer thoroughly with hot water and
a mild detergent. Rinse and dry with a soft cloth. This
r
emoves residual oil and grease left on the surface from
the manufacturing process.
Apply a stainless steel polish to protect the finish and add
luster to the exterior of your warming drawer. Refer to
c
leaning and care recommendations on page 9.
Control Panel Backlighting
T
he Wolf warming drawer has three options for control
panel backlighting; backlight off in Sabbath, backlight on
i
n Sabbath and backlight off in all modes. The backlight
defaults to ON in normal use and OFF in Sabbath mode.
TO CHANGE CONTROL PANEL BACKLIGHTING:
1) Warming drawer must be OFF.
2) Touch and hold arrow and arrow for 5
seconds. The current backlight setting will appear in
t
he LCD display.
3) Use the arrow to scroll through the three back-
light options; backlight off in Sabbath, backlight on in
Sabbath (50% power), and backlight off in all modes. A
selection should be made within 30 seconds. The unit
will default to the current backlight setting if a new
selection is not made within this time.
4) With the desired backlight setting selected, touch
to save the setting.
Temperature Display
The warming drawer temperature display can be changed
from Fahrenheit (F) to Celsius (C) or vice versa.
TO CHANGE TEMPERATURE DISPLAY:
1) Warming drawer must be OFF.
2) Touch and hold both the and arrows for 5
seconds.
3) After 5 seconds, the unit will beep, the backlighting will
turn on, and either F or C will appear, depending on the
current display setting.
4) Touch the or arrow to select either
Fahrenheit (F) or Celsius (C).
5) With the desired temperature display selected, touch
to save the setting.