Filter
Top Products
SERVICE INSTRUCTIONS
REPLACING LIGHT BULBS
CAUTION: Even though the glass is safety glass it may break if bumped, struck or dropped. Care must be
taken when handling the glass.
The bulbs fitted to this heater are 100-130V ~ 60Hz G9 halogen bulbs.
1. Unplug the unit.
2. Open the door of the unit with the handle.
3. Loosen the three (3) screws at the front of the log bed, and remove fixed plate.
4. Carefully lift the log bed up far enough to access the light bulb you will find one (2) 100-130V ~ 60Hz G9
halogen bulbs
under the log bed.
5. Loosen and remove the burnt out bulb and replace with new 100-130V ~ 60Hz G9 halogen bulbs.
6. Return the log bed and fixed plate secure with the three (3) screws.
WARNING: Disconnect power and allow unit to cool completely
before attempting any maintenance or cleaning to reduce the risk
of fire, electrical shock or personal injury.
WARNING: The bulbs fitted to this heater are 110-120V ~
60Hz G9 halogen bulbs the use of any other type of bulb
may result in a fire causing property damage and personal
injury.
~ 9 ~