Xerox CH60DPCF Oven User Manual


 
35
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
CARE AND CLEANING
Cooker Exterior
The outside of the cooker should be cleaned regularly to keep it looking like new.
Wipe over with a soft cloth wrung out in warm water and dry with a soft clean cloth.
You can use mild non abrasive cleaners but always read the manufacturer's
instructions first. Always test their suitability on a small area of the cooker not
noticeable in normal use.
NOTE: DO NOT use scouring pads or abrasive cleaners as they may scratch the
surface.
Wear protective gloves when cleaning any part of your cooker.
Door and Control Panel (Glass)
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
Door and Control Panel Trims (Stainless Steel)
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
Solar Plus Grill
To clean the solar plus grill, use a clean, damp, soapy cloth and wipe over. If
stubborn stains remain, gently clean with a well soaped nylon scouring pad and wipe
over with a damp cloth.
NOTE: DO NOT use metal cleaning utensils, wire wool or proprietary oven
cleaners on the grill element mesh.
WARNING: TO AVOID ELECTRIC SHOCK, BEFORE REPLACING THE OVEN
LIGHT, SWITCH THE COOKER OFF AT THE COOKER CONTROL UNIT (and
allow to cool if the oven has been used).
Replacement of the Oven Light
Unscrew the glass cover, using a suitable cloth to protect the fingers and remove
carefully. Unscrew the existing light bulb, and remove. Screw the new bulb into
position and replace the glass cover, with metal washer, until positioned securely.