Zanussi Oven Oven User Manual


 
Defrosting
Put the food out of the packaging and set it
on a plate on the oven shelf.
Do not cover with a plate or bowl. This can
extend the time to defrost very much.
Put the oven shelf in the first shelf level from
the bottom.
Care and cleaning
Warning! Refer to the Safety chapters.
Clean the front of the appliance with a soft
cloth with warm water and cleaning agent.
To clean metal surfaces use a usual cleaning
agent
Clean the oven interior after each use. Thus
you can remove dirt more easily and it does
not burn on.
Clean stubborn dirt with a special oven
cleaner.
Clean all oven accessories (with a soft cloth
with warm water and cleaning agent) after
each use and let them dry.
If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Stainless steel or aluminium applian-
ces:
Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materi-
als as they can damage the oven surface.
Clean the oven control panel with the same
precautions
Shelf Support Rails
You can remove the shelf support rails to clean
the side walls.
Removing the shelf support rails
1
Pull the front of
the shelf support rail
away from the side
wall.
2
Pull the rear shelf
support rail away
from the side wall and
remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front.
Oven Ceiling
You can fold down the heating element on the
oven ceiling to clean the oven ceiling easily.
Folding down the heating element
1. Remove the shelf support rails.
14
www.zanussi.com