Filter
Top Products
5
Control Panel
All the oven functions are controlled by an electronic
programmer.
You can select any combination of cooking function,
cooking temperature and automatic timing.
In the event of a power failure, the programmer
will keep all the settings (time of day, program
setting or program in operation) for about 10
minutes. If power is not restored within 10
minutes, all the settings will be cancelled.
When the power is restored, the numbers on the
display will flash, and the clock/timer has to be
reset.
i
123 456789
1. ON / OFF
2. Oven Function Control
3. Fast Heat Up / Defrost Function
4. Temperature Control / Current Temperature
5. Decreasing Control (Time or Temperature)
6. Increasing Control (Time or Temperature)
7. Minute Minder
8. Cooking Time
9. End of Cooking Time
}
Cooking Function Display Time display
}
Temperature
display
Programming
Controls
Push Buttons
"On/Off" Push Button
The oven must be switched on before setting any
cooking function or programme. When button is
pressed, the pilot light above will come on, and the
oven light will switch on.
To switch off the oven, you can press button at any
time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show
the time of day only.
i
When button is pressed, the display will
show the current internal temperature if the oven
has not completely cooled down.
Oven Function Control Push
Button
Push button allows you to select the cooking
function. Each time you push this button, a pilot light
will come on in the Oven Function Display, showing
what cooking function has been chosen.
Increase and Decrease Push
Buttons
Push buttons and allow you to increase or
decrease temperature or time settings.